ANCEL S200 Car Smoke Leak Detector EVAP Pipe Smoking Generator Pipe Leakage Analyzer Tester EVAP System Diagnostic Tools

ANCEL S200 Car Smoke Leak Detector is a professional auto pipe leak detect tool and has built-in air pump. It will help us position cars motorcycles leakage on pipe system quickly and exactly ,such as : Intake System Test, Exhaust Systems Test, Car Sealing Test, Fuel Tank System Test.

Full System Diagnostics. Don't Miss Any Leaks.

▶Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.

▶Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.

▶Car Sealing Test: poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.

▶Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough

▶Turbo Test: the leakage of coolant would cause the engine to report high water temperature.

▶Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses.

▶EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling

▶Exhaust System Test: Uncleaned harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.

Overheat & Anti-Frost Protection

For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehicles, ATVS,light trucks and speedboats,Suitable for all car models.

● Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.

● Anti-frost Protection
The device can also work normally at -20℃.

How to do leakage test ?

Smoke Machine Leak Status Indication

Quick vehicle leak diagnosis by pressure display

📌 NO Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system.

📌 Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.

📌Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.

ANCEL S200 has two operating modes: air mode and smoke mode

Press the left button to ventilate the air and press the right button to start the smoke output.

BUILT IN AIR COMPRESSOR

Perform leak ectect at anytime anywhere saving money on buying an extra Air Pump.

FOR ANY TYPE OF PIPES

Package comes with a intake bladder for testing pipe with various diamater.

Specification

Power source: 12V Fully Charged vehicle battery
Current: 6A
Flow rate:<6 L/min
Pressure output: 0.8-1.0 bar (0.8-14.5psi)

ANCEL S200 smoke leak detector has a powerful pressure guage, easy to operate

1/2psi pressure gauge and smoke regulator which helps you control the smoke effect easily and allowing you to estimate the size of the leak by the change of the gauge value.It will specifically mark where the leakage is coming from,improves the efficiency of diagnosis

Packing List：

1pc Power Cord
1pc DeliveryHose
1pc Funnel
1pc Intake Bladder
1pc Service Replacement
1pc Adapter Cone Set
1pc EVAP Adapter
1pc Removal Tool
1pc EVAP Removal Tool

Product Show