SPECIFICATIONS

Brand Name: Huepar

Certification: CE,FCC,RoHS

Hign-concerned Chemical: None

Measurement Model: 16 Lines

Model Number: ZK04CG-L

Origin: Mainland China

Size: 24*26.8*11.5cm

Type: Vertical & Horizontal Lasers

Wavelength: 505-520nm

Huepar ZK04CG-L 4 x 360 2±mm/10m Accuracy Green Laser Level Specifications:

Package Contents:

• 1x ZK04CG Laser Level

• 1x 8000mAh Li-ion Battery

• 1x PV3 Bracket

• 1x Remote Control

• 1x Lifting Base

• 1x Green Target

• 1x Typc-C Power Cord

• 1x Hard Carry Case

• 1x User Manual

High Accuracy ±2mm/10, ±1/13 inch at 33Ft

• From a large number of laser level modules, high precision modules are selected and specially tuned by hand to produce a laser level with an accuracy of 2mm at 10m.

• The percentage of high-precision modules in the total number of modules is only 10%.

• Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.

• The remote control enables to select the 4 x 360° laser lines individually at a distance up to 32.8Ft.

• The laser line(s) can be temporarily turned OFF by the remote control when need to leave for a while.

Line Switching

• Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.

• The remote control enables to select the 4 x 360° laser lines individually at a distance up to 32.8Ft.

• The laser line(s) can be temporarily turned OFF by the remote control when need to leave for a while.

8 Hours Working Time With all beams on

• 8000mAh rechargeable Li-ion battery support the laser level to work for 8 hours with all four 360° laser beams on.

• Type-C charging port can be used to charge the battery through car charger, rechargeable treasure and other ways.

• Battery indicators let you know the power status at any time.

Self-leveling & Manual Mode

• Self-leveling mode:  Unlock the pendulum, and enable the self-leveling mode, when the tool exceeds the self-leveling range by ±3°.

• The laser beam(s) will blink about every 3-5 seconds to notify the user it is not self-leveling now.

• Manual mode:Once the pendulum is locked, it switches to manual mode, the self-leveling function is disabled, the cross laser tool is locked, and you can position the laser level at any angle you need.

Outdoor Pulse Mode

• Turn ON the pulse mode: After powering ON, short press the "Pv" button to turn ON/OFF the pulse mode. When the pulse mode is activated, the laser beams are dimmer.

• Pulse mode extends the working range up to 40-60m in brighter working conditions when using with Huepar Line Laser Detector(LR-8RG/LR-5RG/LR-6RG) .

Strong magnetic bracket

• The ZK04CG uses with 180 degree magnetic bracket, it is easy and convenient for you to use.

• The mount size for this device is 1/4"-20 mount thread, it can be mounted to a tripod or other adapter also.

360° Horizontal Floor Laser & Lifting Base

• This tiling laser tool generates one 360° horizontal floor laser at the bottom that can hit a 1/2 inch ultra-low horizontal line on the ground, prefect for the layout of tile, stone, brick, carpet and hardwood flooring, etc.

• With the lifting base, the laser lines raise from the surface between 0.83 inch and 3.2 inch height.

Use of different scenarios: Construction work, window installation, wall tiling, stair laying and so on.